The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Side Saddle Air Cleaner Brackets
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
JJG1214
Posted 2023-08-28 2:43 PM (#631639)
Subject: Side Saddle Air Cleaner Brackets


Member

Posts: 8

Hi - I'm new to this forum. I own a 1957 Plymouth Savoy with a 301 Poly V8 engine.
I'm gathering the parts to convert from 2 BBL to 4 BBL.
So far, I have the WCFB 2530S, 4 BBL intake (p/n 1619826), 4BBL choke thermostat and 'Side Saddle' 4BBL air cleaner.

My questions are about the air cleaner mounting brackets. Apparently there are two brackets - front and rear.
One pic I found on the Forward Look shows the front bracket attached to the valve cover.
The rear bracket attachment is more of a mystery to me.

Can anyone tell me where these brackets attach?
Also does anyone have them for sale or know where to buy them?
Or is it easier to fabricate my own brackets?
Top of the page Bottom of the page
56D500boy
Posted 2023-08-28 3:53 PM (#631640 - in reply to #631639)
Subject: RE: Side Saddle Air Cleaner Brackets



Expert 5K+

Posts: 9911
500020002000500100100100100
Location: Lower Mainland BC		.
Have a look at this thread (it might be the one that you found already but maybe not):

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=76782&...

If you think you need a bracket on the back, your likely better off just making one similar to the front one.





Top of the page Bottom of the page
Powerflite
Posted 2023-08-28 4:47 PM (#631648 - in reply to #631639)
Subject: Re: Side Saddle Air Cleaner Brackets



Expert 5K+

Posts: 9681
500020002000500100252525
Location: So. Cal		The "A" poly brackets are quite a bit different from the hemi or semi-hemi poly brackets. The Plymouth engine mounted the side saddle air cleaner at both sides from the same middle bolt connection on the valve cover. You can see the brackets for it in this picture. Also, Plymouth used the round lid air cleaner, like what was used on the Dodge, without A/C.

Edited by Powerflite 2023-08-28 4:49 PM




(57 Belvedere 4bbl Air Cleaner Brackets.jpg)



(57 Belvedere Engine.jpg)



Attachments
----------------
Attachments 57 Belvedere 4bbl Air Cleaner Brackets.jpg (84KB - 53 downloads)
Attachments 57 Belvedere Engine.jpg (85KB - 47 downloads)
Top of the page Bottom of the page
JJG1214
Posted 2023-09-12 6:59 PM (#631823 - in reply to #631639)
Subject: RE: Side Saddle Air Cleaner Brackets


Member

Posts: 8

I'm planning on making a bracket from 1 inch wide flat steel.
Question: How thick - 1/16 or 1/8 inch?
Top of the page Bottom of the page
Powerflite
Posted 2023-09-12 11:39 PM (#631828 - in reply to #631639)
Subject: Re: Side Saddle Air Cleaner Brackets



Expert 5K+

Posts: 9681
500020002000500100252525
Location: So. Cal		1/8" thick.
By the way, I'm pretty sure that bracket is all one piece, not 2 pieces, like on the hemi engines.
Top of the page Bottom of the page
JJG1214
Posted 2023-09-13 8:54 AM (#631831 - in reply to #631639)
Subject: Re: Side Saddle Air Cleaner Brackets


Member

Posts: 8

Ok. Thanks.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)