The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Size of the Steering wheel nut
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Steering and SuspensionMessage format
 
Zorc
Posted 2024-02-01 5:11 AM (#633592)
Subject: Size of the Steering wheel nut



Regular

Posts: 95
252525
Location: North Germany		Does anyone know the size of the large nut used to tighten the steering wheel onto the shaft?
Mine is damaged and I can't measure the inch thread. It seems to be a fine thread ( UNF )
I haven't found anything in the documentation.

Maybe I can order the nut somewhere.

Roger


Edited by Zorc 2024-02-01 5:13 AM
Top of the page Bottom of the page
wizard
Posted 2024-02-01 10:14 AM (#633595 - in reply to #633592)
Subject: Re: Size of the Steering wheel nut



Board Moderator & Exner Expert 10K+

Posts: 13054
50005000200010002525
Location: Southern Sweden - Sturkö island		Yes Roger, as for 1960 I know. It's 3/4-20 UNEF threads. I checked with Zollshop, but I only found the tools (not cheap) https://www.zollshop.de/de/Gewindeschneidwerkzeuge/Handgewindebohrer...

That said, check your equipment at work, in the best case there's a lathe with a Norton gearbox - if so, you cut the threads easily. work in small steps of one tenth of a millimeter. I just refreshed my knowledge of thread cutting last week, it takes some time, but it's worth it if you cannot find a certain thread.

Please check your nut inner diameter for to be sure that it's the same thread and diameter for 1960 (or the spare part manual).

Below, please find the spare part # for 1960.








(20240201_155644-rez.jpg)



Attachments
----------------
Attachments 20240201_155644-rez.jpg (217KB - 27 downloads)
Top of the page Bottom of the page
Zorc
Posted 2024-02-01 11:11 AM (#633596 - in reply to #633592)
Subject: Re: Size of the Steering wheel nut



Regular

Posts: 95
252525
Location: North Germany		Hello Sven,
thank you very much - this helps a lot. I found something with your datas in the swiss : https://www.britishparts.ch/products/mutter-3-4-unef-x-20 for a good price.
I will check on other places or i order this one. It`s an ordinary nut but i can use loctite.
The next possibily was an offer on Egay for 44€ plus charge

Thank you
Roger


Edited by Zorc 2024-02-01 11:27 AM
Top of the page Bottom of the page
wizard
Posted 2024-02-01 11:14 AM (#633597 - in reply to #633592)
Subject: Re: Size of the Steering wheel nut



Board Moderator & Exner Expert 10K+

Posts: 13054
50005000200010002525
Location: Southern Sweden - Sturkö island		Happy to help you out Roger!
Top of the page Bottom of the page
dels56
Posted 2024-02-02 1:56 AM (#633604 - in reply to #633592)
Subject: Re: Size of the Steering wheel nut


Extreme Veteran

Posts: 353
1001001002525
Wizard, I don’t think you are alone with ACD. You should see my shop.
Del
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)