The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Pump diaphragm material
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
Dan_in_MN
Posted 2024-04-21 1:21 PM (#634810)
Subject: Pump diaphragm material



Member

Posts: 23

I have a latter model of fuel pump on my Poly. My hard line won't line up and currently running rubber from the pump to the carb. I'd like to attempt a cheaper method and replace the diaphragm material in my old pump.
Anyone know where to get some of the diaphragm material? ??
Thank you!
Top of the page Bottom of the page
wizard
Posted 2024-04-21 1:51 PM (#634811 - in reply to #634810)
Subject: Re: Pump diaphragm material



Board Moderator & Exner Expert 10K+

Posts: 13054
50005000200010002525
Location: Southern Sweden - Sturkö island		You'll need a rubber called Viton, that's the most fuel resistant one
Top of the page Bottom of the page
dels56
Posted 2024-04-21 11:04 PM (#634819 - in reply to #634810)
Subject: Re: Pump diaphragm material


Extreme Veteran

Posts: 353
1001001002525
I think the piece I have came from Grainger. 1/32” viton sheet was 24 x 24 if I remember correctly. It has been a long time. Try Then and Now for a kit for your pump.

Del
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)