This idea of putting discs on your car isn't a new one. The stock items were considered more than adequate when new, and if they were really a problem, you'd likely see all sorts of aftermarket options out there, and concensus on the list that this change is a "Must-do" on your car. Redone stock brakes, if done correctly, are not much of an issue if the discussions on the Impeiral mailing list are any indicator. Many people with old, sloppy, out-of-adjustment drums think that they can improve things by short-cutting straight to "modern" technology. I feel strongly that you should give your car a chance to strut its stuff by redoing what you have top to bottom, eliminating the old, worn parts completely. I did put a dual circuit MC on my 1960 to try to add some safety in the event of a failure, though. Also, adjustments are not always obvious to service people used to modern systems. Reading and printing out a copy of the following for your mechanic might make a big difference. Your mechanic may not want to read it, though. You're probably better off learning how to do it yourself - that way you have a renewable resource that's free except for the energy required to jack the car up. The adjustments can be done with a wrench. http://www.imperialclub.com/Repair/Lit/Master/138/index.htm ===== Kenyon Wills ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm