IML: 67 vs 68 lifters
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
IML: 67 vs 68 lifters
- From: "mike sutton" <mikanlin62@xxxxxxxxxx>
- Date: Thu, 3 Feb 2005 22:12:17 -0800
The 440 used a different length lifter and pushrod from 68 onward. If you
use a 67 and earlier lifter you need the 67 and earlier pushrod and
obviously you would need to use the correct lifter and pushrod for 68 and
later. Summit is ok, but they are NOT technically gifted. Beware of the
parts droids that you may deal with there, they often can barely read the
catalog in front of them let alone comprehend what it means.
Mikey
62 Crown Coupe
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network