RE: IML: 67' No Brake Light Issue...

["DR CHALLENGER" <drchallenger@xxxxxxxxxxx>]

bad turn signal switch

> From: "C. Wilhelm" <ldangel987@xxxxxxxxxxx>
> > Hey peoples...
>
> So tonight I discovered my brake lights are not functioning, and I am at a 
> total loss as to why.
>
> Problem: I press the brake, and I have no brake-lights.
>
> 1. I replaced the stop-light switch a few hours ago.
> 2. I replaced the fuse and checked all others.
> 3. I checked the wiring and cleaned terminals.
> 4. I checked/replaced all brake light bulbs.
>
> Result: Still no brake-lights.
>
> Notes:
> 1. All regular rear lights work when the headlights or parking lights are 
> on.
> 2. Left and Right turn signals function correctly on both front and rear.
> 3. Hazard signals ONLY function in the front! The rear ones do not flash.
>
> Request:
>
> Please provide me with some insight as to what I am missing here. I have 
> checked everything I can think of. The only thing I am not sure about is if 
> the "Sentinel" system could have something to do with it, somehow...
>
> Thanks,
> Cliff




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm