I would just go for it and have the machine shop take down the hubs. If you instruct them correctly and make sure they know they are dealing with rare, precious parts, you should be OK. Even if they are off a few tenths you can correct with spacers. And once you go to the $20 a piece Supra rotors, you'll never go back. Imagine being able to put fresh rotors on with fresh pads- how nice will the brakes work then? --- William Wetmore <langley1965@xxxxxxxxxxxxx> wrote: > Any one have a parts car 67/68 with the budd caliper > system. want to sell the front hubs. Also looking > for a rear passenger door for a 1968 sedan. Has > anyone else made the conversion since Mike? I > would like to keep a spare pair in case something > goes wrong and to keep the car as original as > possible in the event that someday, someone, > somewhere might recast the correct rotors. > > > William > 1961 Chrylser Windsor (Angel) > 1967 Imperial Sedan (Eagle one) > 1968 Imperial Sedan (Milbourne) > > > ----------------- http://www.imperialclub.com > ----------------- > This message was sent to you by the Imperial Mailing > List. Please > reply to mailing-list@xxxxxxxxxxxxxxxx and your > response will be > shared with everyone. Private messages (and > attachments) for the > Administrators should be sent to > webmaster@xxxxxxxxxxxxxxxx > To UN-SUBSCRIBE, go to > http://imperialclub.com/unsubscribe.htm > > ===== --Mike Pittinaro Beautiful Boxcar American Grandeur and Danish modern Style __________________________________ Do you Yahoo!? Meet the all-new My Yahoo! - Try it today! http://my.yahoo.com ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm