Re: IML: RE: A question about 413 Pistons

["DanT" <dplysedan@xxxxxxxxxxxxx>]

Have you tried Egge machine in Ca.? They have just about anything you need 
for engine parts.
Dan
----- Original Message ----- 
From: "W.Roddick" <1roscoe@xxxxxxxxxxxxx>
To: <sknickerbocker@xxxxxxx>; <mailing-list@xxxxxxxxxxxxxxxx>; "'MML'" 
<mml@xxxxxxxxxxxxxx>
Sent: Sunday, April 03, 2005 10:51 PM
Subject: RE: IML: RE: A question about 413 Pistons


> I see major $ signs in those names...
> Maybe I'll get buy with some +.005" rings  :o\
>
> Thanks, Steve
>
> -----Original Message-----
> From: sknickerbocker@xxxxxxx [mailto:sknickerbocker@xxxxxxx]
> Sent: Sunday, April 03, 2005 4:08 PM
> To: W.Roddick; mailing-list@xxxxxxxxxxxxxxxx; MML
> Subject: Re: RE: A question about 413 Pistons
>
>
> > From: "W.Roddick" <1roscoe@xxxxxxxxxxxxx>
> >
> > Thanks all, for your replies on the wrist pins.
> >
> > Now, who the heck sells oversized cast pistons for the 413 that are
> > NOT the
> > 8 to 1 compression truck/industrial types?
>
> Probe, Venolia, Arias, etc.
>
> Custom made though.  I doubt there are any shelf stock 413 pistons that
> aren't the low compression ones anymore.
>
> Steve
>
>
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm