Re: IML: 1960 Brakes locking up!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 1960 Brakes locking up!



I'd like to add one thing here. The service manual says to bleed the upper cylinders first when you are bleeding the fronts.
John
----- Original Message ----- From: "Tim Hulse" <thulse2@xxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Wednesday, April 06, 2005 9:13 PM
Subject: Re: IML: 1960 Brakes locking up!



Sounds like you still have air in the lines to me. You have to keep that res full or there goes everything. Start at the passenger rear tire then drivers side rear then passenger front and last drivers side front. Hope that is all it is. If someone else already told the story Im sorry. Just got in and tired.


Tim
56 Imperial
----- Original Message ----- From: HavADope@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Wednesday, April 06, 2005 8:36 PM
Subject: [Norton AntiSpam] IML: 1960 Brakes locking up!



Hey there everyone,
I tore my Booster apart, and relubed everything- Now it works great!!! After much work trying to convert my 60 to a dual reservoir, I gave up! Part of it was the MC that Kragen Auto Parts sold me(God only knows what year and for what it fits, even though I asked for an 67 Newport Master Cylinder), Part of it was not enough tech research done to determine if it could work, even though I believe it could, and the rest was lack of time, Damn it, I want to drive the car, not work on it. So I removed the dual, and replaced it with the original singal resevoir MC. I tried to bleed with the wife pumping 5X's and holding, but still not to my Satisfaction. The pedal travels all the way to the floor, before the car stops. The brake pads are adjusted out just before they rub. Still, thats a lot of pedal travel. I adjusted the rod to FSM standards, but.... I saw Dicks comment in the Archives about the power bleed setup, but I don't have a spare MC cap to drill holes in. any other suggestions, comments on how far the pedal should travel on a 60 with a working booster before the brakes catch, and how to get them catching sooner?!?!.
Thanks soo much
Marc
60 Imperial 4drht





----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.