RE: IML: 81 thru 83 Imperials
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: 81 thru 83 Imperials



Please don't take this off list, or if you do, please cc me. As an owner of 2 gussied up Aspens I happily wade through hundreds of posts about Budd brakes and the differences between Crowns and LeBarons to read posts about these cars.

Rob

From: "Dick Benjamin" <dickb@xxxxxxxxx>
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
To: <mailing-list@xxxxxxxxxxxxxxxx>
Subject: RE: IML: 81 thru 83 Imperials
Date: Wed, 11 May 2005 09:20:56 -0700

Ken, I'm sorry to hear you are having some teething problems with the 82.
I'd be happy to make some suggestions to you if you'll list out for me what
it does or doesn't do, and when this occurs.  I know that most of the IML
members aren't interested in the "gussied up Aspens", so perhaps we should
take this off line.  My e-mail is dickb@xxxxxxxxx

I do have schematics for the power module including the 23 volt power
supply, and also for the dreaded ASDM and the fuel flow meter; however I
believe all these are posted on the IML web site somewhere - I know I
scanned them and sent them in.

I have not repaired any components for these cars for about 5 years, there
seemed to be no interest in it, even though I was doing it free, so I just
made myself a spare set and took my test bench setup apart to use on other
items. One of the obstacles that stopped most prospective users of my
services is that I insisted that they send me the bad parts first, so I'd
have fodder for further such activity. I'd either repair their item or send
them one of mine, but either way I kept a steady supply of cores and parts.
If you set up to do it, I strongly recommend you follow the same rules - I
learned this a long time ago during my Packard repair shop years.


So far, in 19 years and over 50,000 miles, I've not had to use any spare EFI
parts in my car - what little that has gone wrong with it has always turned
out to be something totally unrelated to the EFI system (distributor cap
carbon tracking, fuel pump cardiac insufficiency, both items replaced with
over the counter parts from NAPA).


I had 3 other 81-83s (one of which was a factory kit converted car), but the
two other EFI cars were similar in reliability, although I did have a bad
FPS switch in one of them and a bad EFI coolant temp sensor in the other.
All 3 of those cars were sold a few years ago (on eBay).


If you want to plunge into the repairing of power modules and the like, I'll
be happy to share what little I know about them with you, but I'll bet you a
weeks pay (either yours or mine, since we're both retired I assume that's a
big fat ZERO) that your problem turns out to be related to something other
than electronics!


You will need a test bench with the normal electronic test equipment and
supplies; from your call letters, I assume you are well fixed in that
regard.

Dick


-----Original Message----- From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Ken W Stephenson Sent: Tuesday, May 10, 2005 9:30 PM To: mailing-list@xxxxxxxxxxxxxxxx Subject: IML: 81 thru 83 Imperials

This near cherry 82 I bought on e-Bay from Southern California just does
not run like my old rust belt veteran 82.  No matter how I tweak it, it's
just not as smooth, nor nearly as reliable.  I have followed all of the
website's fine suggestions, and, since I never say die, I am not about to
convert to a carburetor.  If I must, I will emulate that quirky (CCC)
computer before I say uncle.
Which brings me to my question: does anyone have, or know of, the
availability of schematic and logic diagrams for the CCC, the Air Flow
Sensor, the Power Module, the ASDM, and the Fuel Flow Meter Module?  I
understand that Dick rebuilds the Power Module, so perhaps a schematic is
available for that one.  I also understand from his pages that he needs
some help.  I am also retired, but restless, and would be happy to offer
assistance to others from what I might improve upon using more up to date
components.
I should hope, since these assemblies are "obsolete", that Chrysler would
be more cooperative in making them available.  I know from experience
that this is not true for even 10 year old radios, as I spent days on the
phone trying to get schematics, finally getting one from an authorized
service dealer on the QT.   Schematics for Chrysler radios by Alpine
(those marked made in Japan) and Gold Infinity, are not issued to anyone,
and they tell you that point blank.
One final note, I found an excellent Chrysler schematic of the overall
system in a Mitchell manual that is not even in the Chrysler FSM.
Regards, Ken  k9kws




----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm

---
[This E-mail scanned for viruses by Declude Virus]




--- [This E-mail scanned for viruses by Declude Virus]



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm





----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.