Most of the 50's and earlier tanks had a drain. It would be a hex recess (allen) wrench to undo it. Just go carefully and to state the obvious, do not use anything hotter than a heat gun if heat is needed to break it loose. Ernie and The Black Bitc_!! -----Original Message----- From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of captden30@xxxxxxx Sent: Friday, July 22, 2005 7:26 AM To: mailing-list@xxxxxxxxxxxxxxxx Subject: IML: drain gas tank my 53 imp. has a plug of some kind underneath the gas tank towards the front right side. i would like to drain the tank and i think this is where it can be done. the plug has a torx type hole and what i do not know is how this plug is removed and replaced. i prefer not to experiment with this as these tanks are not easy to find. perhaps this is not a drain plug at all and dropping the tank is the only way to drain it. i have dropped one before and one of the straps bvroke and the line into the tank stripped the threads when i removed it. both of those problems took considerable time and energy to rectify and for anyone who has tried to replace the tank strap you know they cannot be found, only fabricated. anyway, can the tank be drained through the plug if it can be removed? dennis ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm