IML: Exhaust Manifolds
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Exhaust Manifolds



Hi all -

If you want to preserve an exhaust manifold (when off the engine), you can have it refinished with a hi-temp coating in "cast iron" or other color by places like Jet Hot. I had Alfa manifolds done 10 years ago in silver (before cast iron was a choice) and they still look great.

Bob

At 09:49 AM 3/15/2006, you wrote:
Exhaust manifolds were not painted, at least, not on purpose. After an engine
is assembled, it is spray painted the correct color for its specific
application and there is usually overspray around where the manifold is mounted and
paint gets burned off somewhat and turns color from the engine heat. The entire
manifold is NOT painted, only around the exhaust ports where it is bolted to
the heads.




----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.