From: "A. Foster" <monkeypuzzle1@xxxxxxx>
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: CAST CRANKS
Date: Sat, 01 Apr 2006 22:26:45 -0800
Hi;
The cast crank 440's came out about in 1972 or so. Even so I doubt
whether a vibration issue would be related to whether the engine has a cast
iron crank as opposed to a steel one, I would take a look at your harmonic
balancer as well as the engine mounts. Other possibilities for vibration
could be the transmission, the driveshaft, or even a worn out distributor.
Best Regards
Arran Foster
1954 Imperial Newport
Needing A Left Side tailight Bezzel and other trim parts.
----- Original Message -----
From: <imperialdrivein@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, April 01, 2006 9:36 PM
Subject: IML: CAST CRANKS
Hi Everyone,What year did the 440's come out with a cast crank? I have
some vibration issues with a 440 from a 68' 300 that's in my 66' Imp.
Imperially , Gary
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm