RE: IML: 66 Headliner Job

["david munson" <davidmunson30@xxxxxxxxxxx>]

See if SMS have any boarding and make them yourself but remember that you 
need to save the piping and reglue that first . I did mine and they turned 
out really really good so if I can do it so can you DO use the best trimmers 
impact glue you can find and glue carefully only when you are sure you have 
it correct .

David Munson owner of a 66 Crown Coupe in the UK


> From: "Dan Sauer" <dmsauer@xxxxxxxxx>
> Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> To: mailing-list@xxxxxxxxxxxxxxxx
> Subject: IML: 66 Headliner Job
> Date: Wed, 3 May 2006 13:13:43 -0500
>
> Thanks to your suggestions, my headliner replace project got started.  Now
> that I'm in the middle of the job, I've noticed that the sail panels (above
> the rear seats aft of the side windows, the cabin lights mount in these) 
> and
> the panel around the rear window has mold on them, and need to be replaced.
> Does anybody know of a source for replacement panels?  This is for a 66
> Crown Coupe, I think the Crown Sedan was done differently as everyplace 
> I've
> checked says that the headliner goes all the way down to the seats, but 
> then
> there doesn't seem to be any place to mount the cabin lights.  Thanks in
> advance for any help you can shed on the subject.
>
> Best Regards,
> Dan Sauer




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm