Dual exhaust tailpipes for my '67?

["Dick Benjamin" <DickB@xxxxxxxxx>]

David:

The pictures I took are of a factory original SINGLE exhaust system on my
67.  I did compare the system with the DUAL system on my 68, and find it is
identical in appearance and location, excepting only that the cutoff angle
of the two tailpipes is not horizontal, like the factory setup, but rather
at right angles to the turned down ends on the replacement pipes.

I can't send the pictures directly to you as it is against the IML rules,
but I can give you a link to "click" on, here goes:

For the rear view of the pipe, taken from 1 foot off the ground about 6 feet
behind the car, go to:

http://users.sdccu.net/dickb/67origrv.jpg

For the side view, showing the distance to the rear bumper and the cutoff
angle of the pipe, go to:

http://users.sdccu.net/dickb/67origsv.jpg


Dick Benjamin


----- Original Message -----
From: David A. Barker <d_barker@xxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Tuesday, January 29, 2002 6:15 PM
Subject: Re: IML: Dual exhaust tailpipes for my '67?


> Hi,
>    If it isn't too much trouble, I would like to see pictures of what a
> '67 exhaust should look like. I did the same thing and had a less than
> stellar dual exhaust put on by "the cheapest outfit". I would sure like
> to know what an exhaust system looks like on this car when it's done
> right.
>
> Thanks
>
> Dave
> 67 Imp sedan
>
>