http://www.mrgusa.com/ I've seen this guy's parts at the Mopar
Nationals,they looked good,don't now how pricey he is, guess I'll find out
when I get to the chromed plastic interior pieces on my "lesser " Chrysler
products.
Chris...
72 Lebaron
71 Lebaron retired to the barn due to extreme rust
65 Sport Fury Indy Pace Car Convertible ( future project )
69 Dodge Charger RT/SE -on the rotisserie right now
94 Ram tow vehicle/parts chaser
94 Lebaron GTC Convertible ( Wife's one owner 40,000 original mile little
red convertible )
68,69,70, and two 1972 Chargers in various stages of decay...
----- Original Message -----
From: "Paul A. Feeney" <paFeeney@xxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, May 31, 2002 9:07 AM
Subject: Re: IML: D.I.Y Chrome Plating
> The best type of place to try for plastic chrome plating is a wheel & tire
> polishing/plating shop. I've had plastic parts done for next to nothing
> ($20-30 for a smooth piece). These guys are always having center caps done
> for O.E. wheels. From what I understand most plastic pieces are not
"dipped"
> or "sprayed" but it's actually a foil that is wrapped around/over the
part.
> Just throwing my two cents into the ring with this one guys.
>
> Good Luck
>
> Paul A. Feeney
> 82 Blue Wire Wheel EFI
> 68 Black Crown Coupe
> ----- Original Message -----
> From: <PiscesM21@xxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Thursday, May 30, 2002 6:46 PM
> Subject: Re: IML: D.I.Y Chrome Plating
>
>
> > I found out plastic has to be Electrostaticly put on, and no one I can
> find
> > wants a small job for under $2000. They say something about setup.
> > My friend that is a mechanic and owns his own shop had a piece of
plastic
> > replated (2"x4") and it was over $900.
> > Charles in Calif.
> >
> >
Back to the Home of the Forward Look Network