Choke pull off for 66 part #
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Choke pull off for 66 part #



Thanks for the correct #. That is a big help.  I found one, new for $69 and
am waiting for a quote from another source.  What are the club's thoughts on
puttinga used one on.  What exactly is this part's function and can it be
worked around.

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of Chris Hawkins
Sent: Monday, March 17, 2003 1:23 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: RE: IML: Choke pull off for 66 part #


That part number is for the choke itself - not for the
"Choke Diaphragm", as the pull-off is termed in the
parts  book.  The correct part # for the choke
pull-off is 2585 423.



--- Matt Hopkins <mhoppy@xxxxxxxxxxx> wrote:
> My local dealer said the part # is 2264580. Any help
> appreciated
>
> -----Original Message-----
> From: mailing-list-owner@xxxxxxxxxxxxxxxx
> [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On
> Behalf Of Jim Carpenter
> Sent: Monday, March 17, 2003 10:17 AM
> To: mailing-list@xxxxxxxxxxxxxxxx
> Subject: Re: IML: Choke pull off for 66
>
>
> Let us know if you have trouble getting one and we
> can do our best to
> help.  The original Chrysler part number would be
> helpful.
> Jim
>
> Chris Hawkins wrote:
>
> >Carb# for a '66 Imperial is Carter AFB 4131-S.  My
> >experience is that the correct pull-off is not
> easily
> >located, but who knows, you might get lucky.
> >
> >If not, the same one was used on 413's and 440's
> from
> >the mid-60's, so good used ones should be possible
> to
> >find.
> >
> >Chris H.
> >
> >60 NY T&C
> >66 Crown Convertible
> >66 Lebaron
> >
> >
> >--- Elijah Scott <imperial1971@xxxxxxxxx> wrote:
> >
> >
> >>--- Matt Hopkins <mhoppy@xxxxxxxxxxx> wrote:
> >>
> >>
> >>>I took my 66 to my mechanic because carbs are not
> >>>
> >>>
> >>in
> >>
> >>
> >>>my book of knowledge.
> >>>He said the choke pull off is misssing.
> >>>
> >>>
> >>Matt,
> >>
> >>A good option is to note the model number of your
> >>carb
> >>('m guessing it's a Carter AFB, but you'll need
> the
> >>actual number that's stamped on it) and take that
> to
> >>a
> >>NAPA store.  They should be able to locate the
> >>correct
> >>pull-off.  The last time I bought one it was about
> >>$15, so it's not terribly painful.  And there are
> >>only
> >>two screws to replace it.
> >>
> >>Good luck!
> >>
> >>Elijah
> >>PS--Thanks for the AutoTemp tip
> >>1965 Imperial LeBaron
> >>1970 Imperial LeBaron
> >>(3) 1971 Imperial LeBarons
> >>
> >>__________________________________________________
> >>Do you Yahoo!?
> >>Yahoo! Web Hosting - establish your business
> online
> >>http://webhosting.yahoo.com
> >>
> >>
> >>-----------------  http://www.imperialclub.com
> >>-----------------
> >>This message was sent to you by the Imperial
> Mailing
> >>List. Please
> >>reply to mailing-list@xxxxxxxxxxxxxxxx and your
> >>response will be
> >>shared with everyone. Private messages (and
> >>attachments) for the
> >>Administrators should be sent to
> >>webmaster@xxxxxxxxxxxxxxxx
> >>To UN-SUBSCRIBE, go to
> >>http://imperialclub.com/unsubscribe.htm
> >>
> >>
> >>
> >
> >
> >__________________________________________________
> >Do you Yahoo!?
> >Yahoo! Web Hosting - establish your business online
> >http://webhosting.yahoo.com
> >
> >


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.