|
When I had a 66 that needed one of these, I brought the old
one to my local parts store & they matched it up with a new one. The
price was $5.00. The previous owner of the car thought it needed valve seals,
since it ran so rough when cold & put out clouds of black smoke. I
accidentally touched the linkage on the pull off one time & the diaphragm
opened & the problem went away. I knew I had discovered the
problem.
John
----- Original Message -----
Sent: Monday, March 17, 2003 9:14
AM
Subject: Re: IML: Choke pull off for
66
Yes, it is the right name for an external part of the
carburetor assembly,
and you do need one which works.
To find a
vendor for anything on an Imperial, your best bet is always to
check the
IML vendor list -these folks know what you need and are known to
be good
vendors.
Dick Benjamin
----- Original Message -----
From: "Matt
Hopkins" <mhoppy@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent:
Monday, March 17, 2003 7:14 AM
Subject: IML: Choke pull off for
66
> I took my 66 to my mechanic because carbs are not in my
book of knowledge.
> He said the choke pull off is misssing. Is
this the correct part name
that
> I need to be asking for and where
would I find one?
>
> Matt Hopkins
> 66 Crown using a lot of
gas
> 75 Lebaron
> 92 Imperial
>
>
>
>
----------------- http://www.imperialclub.com
-----------------
> This message was sent to you by the Imperial Mailing
List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx
and your response will be
> shared with everyone. Private messages (and
attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
>
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
>
-----------------
http://www.imperialclub.com
-----------------
This message was sent to you by the Imperial Mailing
List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx
and your response will be
shared with everyone. Private messages (and
attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To
UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
|
Back to the Home of the Forward Look Network