Idler Arm Replacement found

[Jim Carpenter <Jim@xxxxxxxxxxxxxxxxxxxxxxxx>]

They would not have to do anything  different as the alignment for toe 
in is done straight ahead.  The simply set it to the correct specs for 
the vehicle.

Bar00n wrote:

>I wonder if an alignment shop would know the difference or if they have to
>do something different to compensate for it.
>
>Carl
>http://www.robdiesel.com
>
>----- Original Message -----
>From: "Jeff Ingraham" <jeff_ingraham@xxxxxxxxx>
>
>  Just to chime in here...  My brother has had a 68
>Chrysler 300 Idler arm on his 67 Imp for about 4 years
>with no adverse effects.   The differences in angle
>and or length of maybe 1/4 of an inch was about the
>only difference between the 2 when you laid them next
>to each other.
>
>
>
>