My black 68 LeBaron has a different steering feel than the green car. The wheel return to straight is not as powerful. I was suspecting improper alignment, but I would not be surprised if it also has a Chrysler idler arm! The previous owner apparently took many such shortcuts in maintaining that vehicle. D^2, 2x68s Quoting Dick Benjamin <dickb@xxxxxxxxx>: > The alignment shop won't even know it's different unless they check the > angle of the right wheel when the left wheel is turned away from > straight > ahead. The shorter idler arm will make the Ackerman angle be wrong in > a > turn, but the car will still track fine straight ahead. I can't > estimate > the danger, but driving a car this way will have more of a tendency to > understeer, and to go into a skid on slippery surfaces, because the two > front wheels will have to slide slightly in a turn. Maybe this is too > small > an effect to notice, but they must have made the Imperial arm longer for > a > reason. > > Dick Benjamin > ----- Original Message ----- > From: "Bar00n" <baroon@xxxxxxxxxxxxx> > To: <mailing-list@xxxxxxxxxxxxxxxx> > Sent: Monday, April 28, 2003 12:35 PM > Subject: Re: IML: Idler Arm Replacement found > > > > I wonder if an alignment shop would know the difference or if they > have to > > do something different to compensate for it. > > > > Carl > > http://www.robdiesel.com > > > > ----- Original Message ----- > > From: "Jeff Ingraham" <jeff_ingraham@xxxxxxxxx> > > > > Just to chime in here... My brother has had a 68 > > Chrysler 300 Idler arm on his 67 Imp for about 4 years > > with no adverse effects. The differences in angle > > and or length of maybe 1/4 of an inch was about the > > only difference between the 2 when you laid them next > > to each other. > > > > > > > >