67 Imperial electrical issues
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

67 Imperial electrical issues



I'd start by checking all fuses. I've had strange lighting situations with a blown fuse in a 63. I would also check for pinched wires to tail lights & any wires near the brake pedal. Have you recently replaced any bulbs? If yes, are you sure they are the correct type? Is the turn signal switch a generic replacement or Mopar & is it wired correctly?
John
----- Original Message -----
Sent: Tuesday, April 13, 2004 4:15 PM
Subject: IML: 67 Imperial electrical issues

After spending a fortune on restoring, stripping, rechroming all birte work--repainting., AND replaced turn signal switch on my car---signals, brake lights ---all electrical worked fine!
I have had all the wood on the dash and panels professionally redone----
Here is now the problem----(driving me and my mechanic crazy!!)
When you step on the brakes ---dash lights and running lights and turn signal fender lights up!
Has anyone experienced this sort of problem before!
I am visiting my mechanic again tomorrow---he is thinking there is some sort of grounding problem some where!
Initially., he thought it may be a faulty turn signal switch---however----when the car is off and you depress the brakes., that is when the dash and running lights illuminate
 
ANYONE!?
THANKYOU
ANTHONY   67 crown convt


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.