'67 hubcap annoyances...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

'67 hubcap annoyances...



-Thanks for all the responses. I plan to experiment with the suggestions so
far, but perhaps "you" were right when you said "More than likely, the noise
occurs because the poor things are old."

-To answer some questions:

1. Yes, I do have Radial tires.
2. Specifically, and currently the left front and the right rear. Strangely,
I almost never hear a peep out of the opposites.
2a. Yes and No, I have switched them around to see if the cause was L/R/F/B
placement.
3. I also am a "windows-down" driver, weather permitting (Bay Area -
California).

Cliff.



------ Original Messages Below ------



----- Original Message -----
From: Billimp68@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Sunday, June 20, 2004 9:43 AM
Subject: Re: IML: '67 hubcap annoyances...


Cliff,

I have driven several 1968 Imperials since 1989, and I can't remember having
squeaky wheel covers, with bias or radial tires.  Is your problem with just
one cover, or with them all?

Bill/Imp, 68's

----- Original Message -----
From: mullic5@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Sunday, June 20, 2004 12:51 PM
Subject: Re: IML: '67 hubcap annoyances...


Our 67 had the same problem. We took the hubcaps apart & cleaned painted
them. When we put them back together we coated the underside of each part
with clear silicone. We also put silicone on all the threads as we
reassembled them. this stopped all the noises, but we still had trouble with
them coming off. We got some covers for an 80's imperial from a recycle yard
for everyday driving, and just put the originals on for special events.
 Larry & Miriam
 67 Crown 4drht

----- Original Message -----
From: <dardal@xxxxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>; <RandalPark@xxxxxxx>
Cc: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Sunday, June 20, 2004 8:42 AM
Subject: Re: IML: '67 hubcap annoyances...


> Quoting RandalPark@xxxxxxx:
>
>
> > That car has never had radial tires on it, so I doubt that will
necessarily
> > cause this problem.
> >
> > Paul
>
> In fact, since the radial tires have "softer" side walls than the old bias
plys,
> it makes even less sense to attribute the noise to radials.  Has anybody
with
> 66-69's noisy hubcaps ever try to go back to cross plys and had the noise
> disappear?
>
> More than likely, the noise occurs because the poor things are old.  By 68
sedan
> makes the hub cap noise occasionally, but my LeBaron is silent.  Both of
course
> have radials.
>
> D^2

----- Original Message -----
From: <RandalPark@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, June 19, 2004 8:59 PM
Subject: Re: IML: '67 hubcap annoyances...


> The wheel covers on my '56 have squeaked since I bought the car in the
early '70s. The reason I know that is because I nearly always drove it with
the windows down. That is the way I think that the Southampton Four Door
Hardtop looks the best. Back when I still had the gas heater, I even drove
it that way in the dead of winter if the sky was clear. That heater would
raise the temperature of the air OUTSIDE the car.
>
> That car has never had radial tires on it, so I doubt that will
necessarily cause this problem.
>
> Paul

----- Original Message -----
From: "Dave Grove" <dave@xxxxxxxxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, June 19, 2004 8:53 PM
Subject: Re: IML: '67 hubcap annoyances...


> Cliff, - let me guess, - you now have radial tires?
> Radials will make the wheels "flex" more than bias-ply tires do, and may
be
> enough to cause this problem.  Maybe some later model wheels (designed for
> use with radials) can be substituted.  I do remember some of them doing it
> anyway (back then), - sometimes a few rounds of electrical tape around the
> "prongs" on the wheelcovers will help.  Or if the caps are the type with
the
> prongs that you can "bend-out" some, - that may help too.
>
> Regards,
> DaveG.

----- Original Message -----
From: "Steve B." <Imperial59@xxxxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, June 19, 2004 8:12 PM
Subject: RE: IML: '67 hubcap annoyances...


>
> -Does anyone else have a problem with irritatingly squeaky hubcaps on
their
> car?
>
> I have had luck in the past wrapping a single layer of duct tape around
the
> sharp pieces that hold the hub caps on the wheel.  Stops the squeak and no
> problem loosing the caps.  This is a problem with several years of mopars
> caused by radial tires and wheels that flex.
>
>                     Steve B.
>


----- Original Message -----
From: "c.wilhelm" <ldangel987@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, June 19, 2004 7:15 PM
Subject: '67 hubcap annoyances...


> -Does anyone else have a problem with irritatingly squeaky hubcaps on
their
> car?
>
> -My '67 came with all original hubcaps...and they squeaked. I had a
blowout
> last year that destroyed one, so I purchased another set of caps so that I
> could salvage and then piece together the best set of 4, which was
great....
> but again they squeak and creak... I have added rubber washers to all the
> fittings that are bolted trying to get rid of this annoying noise, but
they
> again are squeaking...
>
> -So far, the only silent ride I get is if I remove all the hubcaps which
is
> unacceptable... >:[
>
> -I love my original caps, but I CAN'T STAND THE SQUEAKING!!! Anyone???
>
> .Cliff.



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.