'56 Power Window Switch

["Mike & Christine Trettin" <mtrettin@xxxxxxxxxxxxxxx>]

> I finally opened up the drivers door today to replace the broken glass -
> actually a rather easy job.  Obviously I had to disconnect the power
window switch
> in order to remove the door panel and in doing so discovered that two
> terminals are broken on the master switch.  Does anyone know of a source
for a
> replacement or have a car that they are parting out that still has a
functional
> switch?  Is there a way to rebuild these switches including replacing
missing
> terminals and repairing cracked and missing casing?

Jeff,

You can rebuild your master switch like I did on my '56 (I also had a broken
terminal and casing).  Here's a How-To I put together for the club website:
http://www.imperialclub.org/Repair/Electrical/1956Switch/index.htm

Good Luck!

Mike Trettin
1956 Imperial Sedan, Turquoise



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm