Boxcar brake master cylinders and boosters

["Dick Benjamin" <dickb@xxxxxxxxx>]

I have had no problem ordering boosters and master cylinders, although I do
always buy a new master cylinder.  I've been getting my boosters through
Autozone, and my master cylinders from NAPA. I believe the number at NAPA
for the master cylinder is 36259.

Dick Benjamin (proud owner/maintainer of 4 67/68s)

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Rob McCall
Sent: Thursday, September 02, 2004 6:46 PM


Now this next question is for the non-purists.  NAPA informed me that their
supplier doesn't have any cores available for the booster & MC, but they
could rebuild my original pieces.  I looked around on the club site, but
didn't find anything that mentioned swapping in a later model booster.  Does
anyone know if any particular later ('70's) Mopar booster will bolt in?
I'll start looking into it, but if the ground has already been covered,
please let me know.

Thanks,
Rob McCall
'67 Lebaron
'68 Barracuda








-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm