'67 Crown Coupe brake light issue

[Tim Klein <tim@xxxxxxxxxxxxxxxxxxx>]

On my '67 Crown hardtop, the power windows work without the
ignition being turned on.

Should you end up needing to replace your turn signal switch,
you can get a good quality new one from these folks:
http://www.shee-mar.com/
They can sell you a cancel cam too -- which you might as well
replace while you're at it, whether it needs it (yet!) or not.

Good luck!

Tim

> I own a '67 CC & have traced my inoperative brake lights to the turn 
> signal switch in the tilt column. (&^^*%#%). However, I've run 
> across one more item that could possibly change that theory.
>
> If memory serves (after many years), I seem to recall that the power 
> windows work only with the ign/acc "on". Do the power windows on a 
> '67 work directly from the battery or only when the "acc" or 
> ignition is on? (I know that the '57s worked off the battery, but 
> did the '67s?)
>
> My windows activiate regardless of the ignition, so I'm wondering if 
> the wiring could have been 'boogered' with...changing the diagnosis 
> altogether?
>
> Please advise...thanks!
>
> Carl Falletta
> '67 CC (ylw/blk)
> Las Vegas NV
> SoCal Imperial Owners Club member


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm