Re: IML: More on Plugs for '56

[Christopher Hoffman <imperial67@xxxxxxxxxxxxx>]

By the way, forgive my 440-centric comments about Jay's '56... I think the
same principles apply, but I didn't mean to be so thoughtless as to shift
the subject from the one originally posted. My point should have been that
stock setups can almost always be made to work properly without resorting to
the "baling wire and duct tape" approach.

Cheers,
Chris in LA

On 10/25/04 8:06 pm, Christopher Hoffman (imperial67@xxxxxxxxxxxxx) wrote:
> 
> A properly set-up 440 with a stock distributor and the timing set perhaps a
> little more retarded than spec (as little as 4 deg BTDC rather than 16)
> should run quite well unless there is some other problem requiring more than
> a band-aid solution.



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm