Thanks
Mike,
This makes
sense.Now all I have to do is find the right sized plastic
tube.
Tom
-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of michael popp Sent: Friday, December 10, 2004 10:37 PM To: mailing-list@xxxxxxxxxxxxxxxx Subject: Re: IML: Rebuilding Budd Calipers Hi Tom---With the plastic tube you slightly
compress the seal and insert it in straight line with the bore ---the lips
are comressed and will go in straight---Mike Popp ---Piston and seal go into
plastic tube from same side they exit so lips have no interferance goint into
tube or exiting into caliper bore ---tube must be held firmly against the bore
----- Original Message -----
|
Copyright © The Forward Look Network. All rights reserved.
Opinions expressed in posts reflect the views of
their respective authors.
This site contains affiliate links for which we may be
compensated.