Re: [FWDLK] The main difference between the different dot levels of brake fluid is

[David Charles Gedraitis <dcg@xxxxxxx>]

out of curiosity, how do you flush it out?

~dave

On Tue, 1 May 2001, Richard wrote:

> 55-56 Plymouths rust, especially in the brake system.  DOT5 stops rust
> because it will not harbor water.  DOT3 is a paint remover, DOT5 Silicone is
> not.  So it's worthwhile to use DOT5 Silicone.  Every 55-56 Plymouth I ever
> saw has paint missing under and around the master cylinder from brake fluid
> filling spalsh.
>
> The reason you flush out the non DOT-5 is to get the water out.  Since DOT5
> silicone will not absorb water, the water can pool in the lines and
> cylinders.
>
>
>
> ----- Original Message -----
> From: "Joseph Bouboulis" <Joseph_Bouboulis@xxxxxxxxxxxxx>
> To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> Sent: Tuesday, May 01, 2001 2:26 PM
> Subject: Re: [FWDLK] brake bleeding sequence?
>
>
> > You bleed from farthest to closest.
> >
> > The main difference between the different dot levels of brake fluid is
> > resistance to temperature. Yyou can mix standard dot 3, 4 & 5 fluids, but
> > the resistance to temperature will be lowered by the dot 3 & 4 fluid. Be
> > careful though!! Most DOT 5 fluids I am aware of are silicone based.
> Though
> > this will withstand higher temperatures you need to drain, flush and
> > completely clean the entire brake system so there is no fluid residue
> left.
> > It is incompatible with standard brake fluid.
> >
> > To be perfectly honest though dot 3 or 4 should be plenty for a unmodified
> > car that is used mainly for cruising.
> >
> >
> >
> >
> >                     "Edward X. Petrus"
> >                     <desoto@xxxxxxxxxxx        To:
> L-FORWARDLOOK@xxxxxxxxxxxxx
> >                     >                          cc:
> >                     Sent by: Forward           Subject:     [FWDLK] brake
> bleeding sequence?
> >                     Look Mopar
> >                     Discussion List
> >                     <L-FORWARDLOOK@LIST
> >                     S.PSU.EDU>
> >
> >
> >                     05/01/01 05:02 PM
> >                     Please respond to
> >                     "Edward X. Petrus"
> >
> >
> >
> >
> >
> >
> > Hi, brake experts!  Most references I have seen over the years talk about
> > bleeding the wheel cylinders from the closest (to the master cylinder) to
> > the farthest.  My 1957 DeSoto shop manual says exactly the
> > opposite.  Anyone REALLY know what's best?
> >
> > Anyone have any good things or bad things to say about DOT 5 brake fluid?
> >
> > Thanks.
> >
> > Ed Petrus
>