Hi Ron,
The lower hole is for the brake light switch. I removed my original master
from my 60 Chrysler when I did the brake conversion and the switch is in the
bottom. The wires are very very brittle so be careful when you remove them.
I had to splice in new connectors when I changed the switch several years
ago.
Steve Menard.
-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Ron Waters
Sent: Wednesday, July 20, 2005 8:31 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Brake Light Switch
Hi gang -
On the master cylinder there are two outlet holes, one for the hydraulic
brake light switch and one for the line. Which hole is correct for the
switch ? I've seen it both ways, and would think the lower would be more
appropriate, since it keeps the wires out of the way...
Ron
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|
|
Back to the Home of the Forward Look Network