My only problem- I couldn't figure out what size the 'hex screws'(?) were
that retain the horn ring (the ones that come in from the back of the wheel)
on the '58 Dodge??? They seemed to be 3/8" but that nut driver won't fit
down/(up into) -in the bore, 11/32" or 5/16" seemed more likely, but they
didn't seem to fit either ;-( . . .
Seems like they should be phillips, but inspection with a mirror and
flashlight would appear to indicate otherwise . . .
-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of eastern sierra Adj
Services
Sent: Monday, December 26, 2005 6:07 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Turn baby, TURN....
FORTUNATELY, I just had to apply contact-cleaner, liberally, onto/into the
switch (after I un-screwed it, from the 'base-assembly', which, itself
screws into the steering wheel interior.
Neil Vedder
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|
|
Back to the Home of the Forward Look Network