Re: [FWDLK] dash pad foam

[Dan Morton <morton@xxxxxxxxxxxxx>]

You mean, the stuff that grows without bound?  I think it's a bad idea to blow that stuff into anything but an open rigid container, where you can lop off the overflow; what's going to keep it from expanding to the headliner?  Besides, even if you could control the expansion by using a small amount, you would likely end up with a non-uniform distribution of material.

 

I'd be surprised to see this work; just my $0.02.

 

    Dan

-----Original Message-----
From: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of John McCann
Sent: Friday, March 02, 2007 12:19 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Re: [FWDLK] dash pad foam

I don't know if this would work but when I read your question I immediately thought of that spray in foam insulation that goes in liquid then expands into foam.

 

John

----- Original Message -----

From: Larry Gardinier

To: L-FORWARDLOOK@xxxxxxxxxxxxx

Sent: Friday, March 02, 2007 6:06 AM

Subject: [FWDLK] dash pad foam

My next question is about my deflated dash pad. The vinyl or leather looks to be in good shape but the filling has deteriorated leaving it all saggy. Can this be saved? I'm thinking maybe I can soften it up and then fill it with good stuff foam? Any other opinions? Anyone done anything like this?

Thanks,

 Larry Gardinier

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1