----- Original Message -----
Sent: Friday, March 02, 2007 9:51
AM
Subject: Re: [FWDLK] dash pad foam
You mean,
the stuff that grows without bound? I think it's a bad idea to blow that
stuff into anything but an open rigid container, where you can lop off
the overflow; what's going to keep it from expanding to the headliner?
Besides, even if you could control the expansion by using a small amount, you
would likely end up with a non-uniform distribution of
material.
I'd be
surprised to see this work; just my $0.02.
Dan
I don't know if this would work but when I read
your question I immediately thought of that spray in foam insulation that
goes in liquid then expands into foam.
John
----- Original Message -----
Sent: Friday, March 02, 2007 6:06
AM
Subject: [FWDLK] dash pad foam
My next question is about my deflated dash pad. The vinyl or leather
looks to be in good shape but the filling has deteriorated leaving it all
saggy. Can this be saved? I'm thinking maybe I can soften it up
and then fill it with good stuff foam? Any other opinions? Anyone
done anything like this?
Thanks,
Larry Gardinier
*************************************************************
To unsubscribe or set your subscription
options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
Back to the Home of the Forward Look Network