Re: [FWDLK] Exhaust manifold bolts

[eddee@xxxxxxxxxxxxx]

USE STAINLESS STUDS

The water jackets are exposed to the threads, making bolts a pain to remove,,,and you would have to drain cooling system

On Tue, Jan 10, 2012 at 9:17 AM, Richard Whelan wrote:

 Hi Nick, from an original 57 Fury head I have in the  garage 3/8"-16 stud with nut. Stud is 1-1/2" long.

From: Nick Sperduto

Sent: Monday, January 09, 2012 7:53 PM

To: L-FORWARDLOOK@xxxxxxxxxxxxx

Subject: [FWDLK] Exhaust manifold bolts

I have a 64 poly 318 that the exhaust manifolds were removed  from and given to me separate from the engine. What should I using to bolt the  manifolds to the head?

I didn't get any ehaust bolts or studs, etc..

Are the bolts something special?

 

Thanks,

Nick

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1