Re: [Chrysler300] this may cause some yelling and screaming

[G Barker <gbarker@xxxx>]

Hi Jim, All you need to do is keep the engine around 1500 to 1800 not wide open. Gary
Barker

Jim McMullan wrote:

> HI club. I was taught that when you first fired up a fresh engine you had
> to hold the throttle wide open for the first 30 seconds or so.This was done to
> get oil to the cam.Failure to do so could wipe the lobes (one or more ) off the
> cam.But I go back to flat head Fords and before Parkising! Its hard to make
> yourself do it but I've never had a failure on start up.I also rub
> Molybdenum Disulfide on the cam when I install it.I think it helps but have no
> proof. Jim
>
>
>
> ---
>
> --- macthehammer@xxxx
>
> --- EarthLink: It's your Internet.
>
> [Non-text portions of this message have been removed]
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/