Re: [Chrysler300] K console alum

["Kelly Pierce" <jkrestor300@xxxx>]

Bob- After looking at the photos, mine are not at all like those. I did look
up the numbers for the 63 parts and they are different numbers, but it has
been quite some time since I have seen a 63 console to remember if they are
shaped like the 64's at all. Thanks, Joe Pierce.
----- Original Message -----
From: "BobMerritt" <rcmerritt@xxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Tuesday, January 28, 2003 10:34 AM
Subject: [Chrysler300] K console alum


> Here's a question for K people:
>
> I have noticed two styles of aluminum pieces on the consoles. I refer to
the
> piece around the vacuum gage extending down to the console glove box and
to
> the piece at the console rear around the cigar lighter.
>
> I have two consoles where both of those pieces have a shiny smooth finish.
>
> I have two others where those pieces have a herringbone finish. Again, the
> front matches the back piece.
> Photos of the herringbone are at:
> http://www.chrysler300club.com/rcmstuff/kcon/alum.html
>
> These happen to be Ks, not sports, although I believe consoles would swap
> between the two.
>
> Any thoughts?
>
> Bob Merritt
> Auburn, NY
> -3 when I got to work. Top that.
>
>
>
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>