Re: [Chrysler300] Freeze plug install

["Charlie Valentine" <cross.ram@xxxx>]

I have a tool out in my toolbox. It is approx. 12 to 16 inches long. It is
like a punch with a swivel at the one end. The swivel end is also threaded
to accept several size heads. There are 4 or 5 heads to choose from. With
the swiveled end and with the engine in the car you should be able to
install them. Most of the time. If the engine was out of the car this tool
would be a snap. I do believe that,with the engine out of the car, many
Automotive Technicians (they used to be called Mechanics) will use a hammer.
I should be home this Saturday around 3:00 if you would like to borrow the
tool.

Charlie Valentine
Pennsylvania
300G, 62 300 Sport Convertible



----- Original Message -----
From: "Dan Dunkleberg" <Signboy@xxxx>
To: <chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, February 03, 2003 7:33 PM
Subject: [Chrysler300] Freeze plug install


> Hi all,
>
> Is there a special tool needed to install the disc type freeze plugs in
> the 413 motors?
>
> Thanks for your help,
>
> Dan
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>