Re: [Chrysler300] alternative to Mopar Performance electronic distributor kit

["Steve Galezowski" <stevenlulu@xxxx>]

I looked into the MSD Ready to Run and Mopar units. I choose the Mopar unit
for two reasons: 1. Price Mopar $190; MSD $370 and 2. Shouild I decide to
later I can hook up an MSD box to the Mopar unit but not the MSD unit since
the MSD unit has the internal module.

Steve Galezowski


----- Original Message -----
From: "John Hertog" <crossram@xxxx>
To: "Chrysler 300 Club Listverver" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Tuesday, March 04, 2003 9:31 PM
Subject: [Chrysler300] alternative to Mopar Performance electronic
distributor kit


> Hi to all,
>
> We were recently discussing the pros and cons of Pertronix versus Mopar
> Performance. Seems the list members agreed that, when a non-tach drive
> distributor can be used, the Mopar Performance unit is the way to go .
>
> Gerry Steinberg also talked about stuffing Mopar Performance guts inside
a
> tach drive distributor - Gerry, I'd sure like to hear more about that and
> exactly how it was done.
>
> But - according to the new issue of HotRod (04-03, page 18 ) there is now
an
> alternative to these systems, for, once again, non tach-drive B and RB
> distributors. The new contender is: MSD. They offer a new "Ready To
Run"
> distributor series, for Chebbies and Ferds and AMC's and Oldsmobubbles
and -
> yes - even Mopars ! These nice units are complete with an INTERNAL module
> and do not require an external ignition box to run ! Just wire up to the
> coil and it will fire right up ! Sounds neat... if you fear electronics,
> this is your ignition salvation !
>
> John
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>