Re: [Chrysler300] Hot Runnin' 413!

[G Barker <gbarker@xxxx>]

Even though this is not your problem, I always use a high flow thermostat. Mopar dealers
have them for motor homes. Several parts houses sell them. The ones I bought were made
by Robert-Shaw .
3 cores were used by the tens of thousands for many years with no problem except in
extreme conditions
Did you have your radiator cleaned out? If not that very well could be your problem.
Good luck- Gary Barker

jennifer allyn wrote:

> To keep a big block cool is it suggested going with a 4 core radiator?
> (I believe the factory gave us 3 cores.)
>
> I run a 160 thermostat; have a new fan clutch, 7 pound radiator cap, new
> hoses all around, new water pump and a clean block.
>
> Thanks?
>
> [Non-text portions of this message have been removed]
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


[Non-text portions of this message have been removed]