RE: [Chrysler300] Turn Signal Switch Removal

[Brandt Jimerson <brandt300g@xxxxxxxxx>]

Yes hello Charlie, Paul and everyone! Your first assumption is right Charlie about accessibility to the nuts holding turn signal switch in place hence one CAN get to them without going back behind the dash. Once those nuts are removed (preferrably with screwdriver-like handle, w/ socket directly on end), switch can be carefully 'worked' down and out through a lot of other wires that will want to catch and tangle with the whole turn signal switch assembly but with a little patience, can be removed or installed. Once switch is out 'dangling', it can be disconnected. My switch if I can remember needed some pretty firm pressure for disconnection. If you can hold harness with one hand and pull switch with other (provided you can get both hands up there in the small place), that's a good way to go!  As for the headlight switch, I had got that out one time as well but the way I did it, was wrong (pulling knob off then fishing out the switch behind dash with intentions of simply super gluing
 knob back on when finished).  I'm not exactly sure word for word what some recent advice was on this but seem to remember atleaste that knob AND stem come out together AFTER something is pressed and/or released behind the dash on switch. It's better than yanking off knob! Hope I was of some help!!  Sincerely and 300ly, Brandt H. Jimerson, 300G.

john_nowosacki@xxxxxxxxxxx wrote:Those nuts are definitely accessible from the front.

-----Original Message-----
From: Charlie Valentine [mailto:cross.ram@xxxxxxxxxxx]
Sent: Friday, February 04, 2005 3:19 PM
To: Chrysler300@xxxxxxxxxxxxxxx; Paul Weihl
Subject: Re: [Chrysler300] Turn Signal Switch Removal



Paul,
Once you remove the  Chrome Pushbutton Bezel  you have to remove the 2 nuts 
that hold the Turn signal switch to the bracket. I thought that the 2 nuts 
were accessible right from the front , but I may be wrong and if so you have 
to reach from behind the dash to get at them.  Hope this helps...Just going 
by memory.

Charlie Valentine

----- Original Message ----- 
From: "Paul Weihl" <pweihl@xxxxxxxxxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Friday, February 04, 2005 12:53 PM
Subject: [Chrysler300] Turn Signal Switch Removal


>
> Hello Everyone,
>
> I received excellent feedback on the operation of the automatic canceling 
> of the turn signal switch, thanks to all that responded.  I check the 
> canceling switch and everything there is in excellent working order, so 
> now I'm trying to remove the lever turn switch, it appears to be very 
> sluggish.  My problem now is how to remove it.  I was able to remove the 
> pushbutton transmission housing, headlight and wiper trim plate.  There 
> doesn't seam to be a way to remove the outside housing cover to gain 
> access to the switches.  How does one get to the turn signal switch to 
> remove it and to remove the headlight switch, it too needs to be cleaned. 
> Again you help will be greatly appreciated.  Thanks.
>
> Paul
>
> [Non-text portions of this message have been removed]
>
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
> Yahoo! Groups Links
>
>
>
>
>
>
>
> 





To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links









To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 



---------------------------------
Yahoo! Groups Links

   To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
  
   To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
  
   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



		
---------------------------------
Do you Yahoo!?
 Yahoo! Mail - now with 250MB free storage. Learn more.

[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Help save the life of a child.  Support St. Jude Children's Research Hospital's
'Thanks & Giving.'
http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/