[Chrysler300] wiper trans pivot

[david dumais <dvd_dumais@xxxxxxxxx>]

Thanks Group for your input on my leaking wiper pivot shafts.   I knew I had a pair in the barn.      After searching thru a dozen or so boxes, bingo!     Here's what I see for sealing:
  The foam rectangular gasket between flange and firewall ( which could be fabricated from old
  bike tire tube), a rubber seal of sorts at the base of the pivot, above the flange surface.
   
  I'm thinking this could be duplicated with black RTV about 1/4" diameter evenly around base of shaft.     And both mounting bolts appeared to be sealed at hex head side of flange.
   
   Found pairs of door handles which need re-plating, and odd's and ends of small body parts
  etc.                                              
                                            Thank the Gods for storage.
                                                 thank you'all      300K ly     Dave

 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/