RE: [Chrysler300] Pod Question

["Bob Jasinski" <rpjasin@xxxxxxxxxxx>]

I've never heard of or seen an autopilot on an F or G in the 30 years I've
owned my G.  I don't know where it would have been mounted, there's just no
room.  I agree with others that have said the pod was probably installed by
a previous owner.  The only pod on the right side of the steering column is
to control floor air on AC cars, and it is under the ignition switch.
 
Bob J 

  _____  

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Mark Souders
Sent: Friday, June 05, 2009 8:09 AM
To: moparfan@xxxxxxxxxx; Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Pod Question





Gary,
Ya, good point. Since my H doesn't have the rams, I never paid much
attention to the space needed for the auto pilot unit. I'm sure somebody
else can help out with this one.

Mark
 

-----Original Message-----
From: Gary Runkel <moparfan@wowway. <mailto:moparfan%40wowway.com> com>
To: 'Mark Souders' <MRS954@xxxxxxx <mailto:MRS954%40aol.com> >; Chrysler300@
<mailto:Chrysler300%40yahoogroups.com> yahoogroups.com
Sent: Fri, 5 Jun 2009 10:53 am
Subject: RE: [Chrysler300] Pod Question

Mark Soulders,

I totally agree with your description of the dash pod controls. However, it
has me wondering if Auto Pilot was even offered on the F or G? It doesn't
seem like there would be enough room under the hood with the long rams AND
the auto pilot unit.

 

Gary Runkel

Canton, MI

 

From: Chrysler300@ <mailto:Chrysler300%40yahoogroups.com> yahoogroups.com
[mailto:Chrysler300@ <mailto:Chrysler300%40yahoogroups.com> yahoogroups.com]
On Behalf Of Mark Souders
Sent: Friday, June 05, 2009 7:38 AM
To: Chrysler300@ <mailto:Chrysler300%40yahoogroups.com> yahoogroups.com
Subject: Re: [Chrysler300] Pod Question

 

Mark,
If it's under the ignition switch, it was probably the floor air control
knob, if your car has or had AC. If it's under the volume knob, it could
have been the cruise control knob. Or maybe someone just poked a hole and
installed the manual choke. If you remove the bezel and find a nicely
punched hole, it was probably put there by the factory, but if the hole
looks like it was made with a drill or a hacksaw, it's probably home grown.

Regards,
Mark Souders
300H
Mohrsville, PA

-----Original Message-----
From: Knutsen, Mark C <Mark.Knutsen@pinnaclefoodscorp.
com>
To: Chrysler300@ <mailto:Chrysler300%40yahoogroups.com> yahoogroups.com
Sent: Thu, 4 Jun 2009 3:41 pm
Subject: [Chrysler300] Pod Question

My G came with a chrome dash pod placed under the volume control knob.
Somewhere along the way this pod was converted from its original use to
a manual choke. Can anyone tell me what the pod at this position was
supposed to hold? 

Thanks

-Mark Knutsen

300G

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/