I'd check the stoplight switch before buying a new one. Disconnect the wires from the switch, place a continuity tester across the terminals and press the brake pedal. If you get the continuity, the problem is elsewhere. If not, it is the switch. Good luck. C-300'ly, Rich Barber 1955 Chrysler C-300 (6 Volts barely lights the filaments) -----Original Message----- From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Matt Allyn Sent: Thursday, June 04, 2009 7:11 PM To: Chrysler300@xxxxxxxxxxxxxxx Subject: [Chrysler300] 1962 Brake Light Switch The fuse is good The bulbs look good The wire is attached to the brake light switch Must be a bad switch; right? Where does one get a new Brake Light Switch for our 1962 models? Thanks! Matt Allyn [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/