Re: [Chrysler300] care re using narrower centre wiper rubbers

["Tom Barrett" <tfb2@xxxxxxx>]

Welcome back, Christopher.  I have missed reading your epistle's.

    Tom

  ----- Original Message ----- 
  From: christopher beilby 
  To: finsruskw@xxxxxxxxxxxxxxx ; mrreed@xxxxxxxxx ; chrysler300@xxxxxxxxxxxxxxx 
  Sent: Sunday, October 11, 2009 6:09 PM
  Subject: [Chrysler300] care re using narrower centre wiper rubbers


    
  Just a caution/thought?
  Be very careful if you are not sure replacement wiper rubbers have the wide enough centre-raised (triangle) strip that keeps them in the blade. I got briefly caught in the showers we have been having near endlessly for the last 12 weeks, turned the wipers on in the '57 TBird while at lights just to clear screen, and after 2 wipes, noticed it looked like part of wiper rubber suddenly came off on passenger side.

  With only 2 or 3 wipes, on drying it off by hand, I saw it was enough to scratch the whole glass, where the four little bent back overthemselves bits are on the blade that you slip the rubber holder bit through.

  Also when I got home about 3 miles away, there was whole new rubber blade sitting at base of screen - I then remembering it one replaced earlier, but had not used it as the car has no top on it as I restore the complex frame part, and I normally don't drive it in the rain.

  ONLY GOOD NEWS ABOUT IT ALL, and maybe for any 50s-60s, 300 user - with an old windscreen - is I used cutting compound to polish out the faint scratch arcs, and BOY IT MADE THE SCREEN SO MUCH CLEARER TO SEE THROUGH, I DID THE WHOLE OUTSIDE OF SCREEN, and you would not believe how much better/easier to see through. Any 300 owners with original 50s screens try it, it one of best fast least costly ways to make using an old car/classic way better. I used just ordinary good quality machine green cutting compound with good hand held cotton cloth, and it took very little time and effort - maybe try a test bit first.

  The thing that amazed me was just those 2-3 wipes with weak old Ford vacuum wipers scratched the glass - hate to think what Chrysler multi speed electric wipers would do to a 300 screen?!! 40 years using old cars, and I stiill learning new things, handy little trick, many others maybe knew years ago?!

  Christopher Australia

  To: mrreed@xxxxxxxxx; Chrysler300@xxxxxxxxxxxxxxx
  From: finsruskw@xxxxxxxxxxxxxxx
  Date: Sun, 11 Oct 2009 09:34:21 -0500
  Subject: Re: [Chrysler300] windshield wiper refill blades

  I ran into the same problem on the way to Branson. Got a pair of refills 
  from O'Reillys and tried to make them work but had no luck. Even after I had 
  crimped the arms to accept the narrower blades they still flopped around in 
  the arm enough that the arm would nearly scratch the windshield so I took 
  them back.

  Not only is the slotted metal blade holder, for lack of a better term, too 
  narrow but the blade did not seem to be as "tall" as the originals. O got to 
  wondering later that maybe the original blade holder might be substituted 
  for the newer narrow one but by this time the rain had pretty much cleared 
  out and wipers were not an isue.

  Dave Schwandt

  ----- Original Message ----- 
  From: "Michael Reed" <mrreed@xxxxxxxxx>
  To: <Chrysler300@xxxxxxxxxxxxxxx>
  Sent: Sunday, October 11, 2009 5:26 AM
  Subject: Re: [Chrysler300] windshield wiper refill blades

  >I searched for years, but all the refills I found were to narrow for the 
  >arm. I finally just modified the arm to securely accept the narrower 
  >refills.
  >
  > Mike
  >
  > Nothing screams liberal quite like making fun of someone's disability.
  >
  > ----- Original Message ----- 
  > From: M. Litsky
  > To: Chrysler300@xxxxxxxxxxxxxxx
  > Sent: Saturday, October 10, 2009 7:25 PM
  > Subject: [Chrysler300] windshield wiper refill blades
  >
  >
  > Hi Group
  >
  > I have a 300k and I need new wiper blade refills. They are 16 inch and I 
  > can not find them locally. Does anyone know where to purchase them. The 
  > refill I did find did not stay in the arm. It was not wide enough to stay 
  > in the slide. Thanks for your help Mike 300k
  >
  > [Non-text portions of this message have been removed]
  >
  >
  >
  >
  >
  > [Non-text portions of this message have been removed]
  >
  >
  >
  > ------------------------------------
  >
  > To send a message to this group, send an email to:
  > Chrysler300@xxxxxxxxxxxxxxx
  >
  > For list server instructions, go to 
  > http://www.chrysler300club.com/yahoolist/inst.htm
  >
  > For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups 
  > Links
  >
  >
  >
  > 


  __________________________________________________________
  Use Messenger in your Hotmail inbox Find out how here
  http://windowslive.ninemsn.com.au/article.aspx?id=823454

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/