RE: [Chrysler300] Sill Plate

["George McKovich" <george@xxxxxxxxxxxx>]

Tom and all.

With my recent experience (in past 6 months) with Charles Sihilling, where I
had 84 pieces of potmetal and aluminum refinished and where I had to send 44
of those back to be redone, only to received them back with basically
NOTHING done to improve them, I would not be surprised if you got someone
else's sill plates.. Mine were also polished extremely shiney and I doubt
were either bright dipped nor anodized. Much of the potmetal still showed
red areas where the copper had not been covered with nickel before being
chromed, aluminum grille was anodized without removing any nicks or dings
and I too received ONE piece of someone else's chrome back in my shipment..
Thank God it apprears I did get all of my pieces back. NEVER again with this
character!!!

 

George

 

 

  _____  

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Tom Cox
Sent: Wednesday, October 21, 2009 05:30 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Sill Plate

 

  

I sent my sill plates to Sihilling Plating for anodizing 6 or 8 months ago
and a set was returned 6-7 weeks later. I opened them up and found them very
shiny (more so than I expected) but I was OK with that. 

Now that I am ready to install them, I find that they don't fit. In looking
more closely, I realize they are the wrong sill plates!

I am working with Sihilling to determine if they belong to someone else or
whether I sent them the wrong set (although the 300F sill plates are the
only ones I have ever had for a 300) and I am trying to learn what 300 these
fit. I have uploaded a picture to the link below so that, hopefully, someone
can tell me what car these were designed for. If you go to the link, on the
left side, select "download this albumn", and you will be sent a zip file.
Open the zip file (you don't have to buy the WinZip program-just close it)
and you will have a picture of a beautifully finished "300" sill plate of
unknown origin. Any help would be appreciated as to which Chrysler 300 this
would fit. 

http://photobucket. <http://photobucket.com/Cox300> com/Cox300

Thanks for your help. By the way, the exhaust system has been installed and
it is going to the convertible top shop in a week or so. At least I am
getting closer!!!

Tom Cox

[Non-text portions of this message have been removed]







E-mail message checked by Spyware Doctor (6.1.0.447)
Database version: 6.13480
http://www.pctools.com/spyware-doctor-antivirus/
<http://www.pctools.com/en/spyware-doctor-antivirus/> 



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/