Re: [Chrysler300] Sill Plate

[moparpjf@xxxxxxx]

In defense of Sihilling, I have had nothing but good experiences with  him. 
 I am not doubting what was said below, but I have never had a  problem.
 
Pete Fitch
 
 
In a message dated 10/21/2009 11:47:26 P.M. Eastern Daylight Time,  
george@xxxxxxxxxxxx writes:

Tom and  all.

With my recent experience (in past 6 months) with Charles  Sihilling, where 
I
had 84 pieces of potmetal and aluminum refinished and  where I had to send 
44
of those back to be redone, only to received them  back with basically
NOTHING done to improve them, I would not be surprised  if you got someone
else's sill plates.. Mine were also polished extremely  shiney and I doubt
were either bright dipped nor anodized. Much of the  potmetal still showed
red areas where the copper had not been covered with  nickel before being
chromed, aluminum grille was anodized without removing  any nicks or dings
and I too received ONE piece of someone else's chrome  back in my shipment..
Thank God it apprears I did get all of my pieces  back. NEVER again with  
this
character!!!



George





_____  

From: Chrysler300@xxxxxxxxxxxxxxx  [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Tom Cox
Sent:  Wednesday, October 21, 2009 05:30 PM
To:  chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Sill  Plate





I sent my sill plates to Sihilling Plating  for anodizing 6 or 8 months ago
and a set was returned 6-7 weeks later. I  opened them up and found them 
very
shiny (more so than I expected) but I  was OK with that. 

Now that I am ready to install them, I find that  they don't fit. In looking
more closely, I realize they are the wrong sill  plates!

I am working with Sihilling to determine if they belong to  someone else or
whether I sent them the wrong set (although the 300F sill  plates are the
only ones I have ever had for a 300) and I am trying to  learn what 300 
these
fit. I have uploaded a picture to the link below so  that, hopefully, 
someone
can tell me what car these were designed for. If  you go to the link, on the
left side, select "download this albumn", and  you will be sent a zip file.
Open the zip file (you don't have to buy the  WinZip program-just close it)
and you will have a picture of a beautifully  finished "300" sill plate of
unknown origin. Any help would be appreciated  as to which Chrysler 300 this
would fit. 

http://photobucket.  <http://photobucket.com/Cox300> com/Cox300

Thanks for your help.  By the way, the exhaust system has been installed and
it is going to the  convertible top shop in a week or so. At least I am
getting  closer!!!

Tom Cox

[Non-text portions of this message have been  removed]







E-mail message checked by Spyware  Doctor (6.1.0.447)
Database version:  6.13480
http://www.pctools.com/spyware-doctor-antivirus/
<http://www.pctools.com/en/spyware-doctor-antivirus/>  



[Non-text portions of this message have been  removed]



------------------------------------

To send a  message to this group, send an email  to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to  
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to  http://www.forwardlook.net/300-archive/Yahoo! Groups 
Links







[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/