RE: [Chrysler300] RE: [Chrysler] Problems with transmission shift cable replacement on 300G

["Bob Jasinski" <rpjasin@xxxxxxxxxxx>]

I've been on the phone to tech departments for Raychem and 3M, both make
shrink tubing, to get a recommendation for the best product for the job.
Keep In mind it must be not be affected by direct contact with oil and be
somewhat heat resistant due to the close proximity to the exhaust.  

The problem I'm having is that you have to buy a 200' spool of the stuff,
its hard to find 4' sticks that have the characteristics needed.

Bob J




------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/