Re: [Chrysler300] 3 F & G questions

[John Nowosacki <jsnowosacki@xxxxxxxxx>]

Past research led me to believe fender liners were in place for the body drop over the rams and carbs, but not air cleaners.  After body drop, cutouts were bolted in and carbs attached before wheels/tires were put on.

On Thu, Oct 10, 2013 at 2:37 PM, David Schwandt <finsruskw@xxxxxxxxxxxxxxx> wrote:

 

#1 Were the fender liners installed on these cars after the body drop and engine installation

 

#2 Or, were they installed and  the cutouts in the liners were  to allow for clearance of the rams for the body to drop over the installation?

 

Was the engine fully assembled (rams and exhaust) and installed in the frame before the body drop?

 

Would like some input on this please

 

Thanks Gang

Dave Schwandt

__._,_.___

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___