|
Hi John, Time plays tricks on me. What really happened as I now recall it was that I was given a 1955 Dodge sedan. I paid $5 to rent a towbar, hence a $5 car. It was said to run rough, and that ultimately was the car with the missing conrod, pistons and half a cylinder skirt. In the Dodge Hemi engine. I then bought a junkyard DeSoto Hemi to replace it,year unk. The wrecking yard assured me it would interchange if I swapped some parts around. I recall the engine mounts caused me to more. I rebuilt the DeSoto engine to the extent of putting new rings in it but nothing else-no valve job. I finally got the engine in and was looking forward to a smooth running Dodge.Then it developed a massive pool of oil under the car and I shut it down. It turned out my DeSoto engine had a hollow crankshaft which was there because it shared oil with the transmission (????). I recall discussing options such as plugging the end of the DeSoto crankshaft, swapping crankshafts etc. , but I sold it to the junkyard for $15 and they picked it up. My earliest adventure into cars! Mike Moore On Jun 27, 2016, at 12:19 PM, John Grady <jkg@xxxxxxxxxxxxxxxxx> wrote: I bought three Desoto motors from local neighborhood crook when I was ~ 16, (~1959) cheap, ---two had Chrysler firepower valve covers put on them ; my dad ended up burying them in our back yard. Dug a hole next to them 8 years later and pushed them in. One Chrysler industrial 354 out of junkyard sitting next to them, ended up in a 54 Ford coupe though. I also pulled apart a nice running 392, left in pieces in basement. He “got rid of that” too….this bug bites early , before your brain has grown up. From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Michael Moore mmoore8425@xxxxxxx [Chrysler300] Sent: Saturday, June 25, 2016 10:10 AM To: Rich Barber Cc: paul; chrysler300 Subject: Re: [Chrysler300] '56 300 engine on eBay The appearance of the engine makes me wonder if it was assembled as a display for a museum etc. (Painted carb bodies don’t appeal to me!) It reminds me of the 55 Desoto Hemi I bought back in the early 60’s to put in a Dodge sedan I had. The PO said it ran pretty rough and needed a tuneup. It did run rough! It had had a piston and connecting rod removed, because the cylinder wall was broken out in one area. I was always curious what that was all about. It sure looked nice though! Mike Moore 300H On Jun 24, 2016, at 7:38 PM, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote: Paul: __._,_.___ Posted by: Michael Moore <mmoore8425@xxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap