Re: [Chrysler300]

I recommend that you buy a tube and try it. Your statements are incorrect with respect to this product.

I used this on power window gears over 20 years ago. When I had occasion to open up the door panels, the grease was still very soft and usable.

Ron

----- Original Message -----

From: John Grady

To: Ron Waters

Cc: chrysler300@xxxxxxxxxxxxxxx

Sent: Tuesday, July 05, 2016 6:11 PM

Subject: Re: [Chrysler300]

Silicone greases within 20 feet of car paint is a huge no no . To me anyway . Cannot get it off you get it on your hands , ends up everywhere . Never used in gearboxes to my knowledge .. Ever . Good lubricant for rubber boat bushing or waterproofing --not gears .

Wheel bearing grease is probably exactly right grease but has fibers in it which front end grease I think does not . I am not sure of impact of that , other than wheel bearings are all rolling contact . WIndow worm gear is sliding contact , as is ball joint . Studebakers had a special grease for steering maybe ford too . Also sliding worm. But not that critical in window box . I have seen the white stuff rock hard . But 75 year old front ends still greasy .

Whatever floats your boat ....!

Sent from my iPhone

On Jul 5, 2016, at 12:30 PM, 'Ron Waters' ronbo97@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

I'm not a fan of either suggestions stated below. I use an orange, silicon-based lubricant called Syl-Glide, which is available in a tube. Works great, doesn't dry up like white lithium grease and isn't messy like wheel bearing grease.

Ron

----- Original Message -----

From: Keith Boonstra kboonstra@xxxxxxxxxxxx [Chrysler300]

To: Chris Pinder

Cc: 14149@xxxxxxxxx ; chrysler300@xxxxxxxxxxxxxxx

Sent: Tuesday, July 05, 2016 11:15 AM

Subject: Re: [Chrysler300]

I think the white lithium is somewhat similar to the stuff they used in the factory back in the day. The effect is pretty much the same in appearance anyway. They both tend to dry up into a crust over time. I've found that a more long-lasting grease to use in an application where you won't regularly go back to re-lube is a viscous wheel bearing grease.

Keith Boonstra

-

On Tue, Jul 5, 2016 at 10:51 AM, kmaniak@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

I use white lithium grease in a spray can. Available at most auto parts stores here in the states.

Chris the K MANIAC

-----Original Message-----
From: 'Tomas Turovara' 14149@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: Chrysler300 <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Sat, Jul 2, 2016 8:16 am
Subject: [Chrysler300]

Hi 300 people

What kind of grease should be used in the window regulator gearbox with plastic gear?

Tomas Turovaara

Kengisgatan 33

981 33 Kiruna

Sweden

E-mail home; 14149@xxxxxxxxx

E-mail Work: 15811@xxxxxxxxx

Ph +46 980 14149 cell +46 70 5544890 Fax 46 980 66404

__._,_.___

Posted by: "Ron Waters" <ronbo97@xxxxxxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___