Re: [Chrysler300] Limited Slip or not?

["dverity@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

You will have to hold the driveshaft yoke stationary will checking. The drag you feel on one side is likely brake shoes.

Don

 

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Wednesday, March 04, 2020 8:19 PM

To: Chrysler 300 List

Subject: [Chrysler300] Limited Slip or not?

 

 

All:

 

I am trying to figure out if a 1964 300 Sport sedan parts car I purchased recently has a limited-slip differential.

 

As I've done in the past to check other cars, I jacked up the rear with both tires off the ground and then rotated one rear tire.

 

I expected the other tire to turn - the same way for a limited-slip, the opposite way for an open diff.

 

Rotating one wheel, the other tire did not rotate -  so I went over to the other side and rotated it. Nothing from the opposite tire either!

 

There is no driveshaft - could that be the issue?

 

As it is, the driver's side tire rotated with some effort.  The passenger side had little resistance.

 

If I find the build sheet, where would the Sure-Grip notation be?  The body tag is missing.

 

Thanks for helping to solve this minor mystery.

 

John Spiers

A 300D and a couple of 300Ks in Florida

 

 

 

__._,_.___

---

Posted by: <dverity@xxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___